|
LIQUIDCHECK S4000
ON
LINE APPLICATION
SlurryScan
LiquidCheck S4000 is the latest edition to the
Branscan instrument range, and offers manufacturers of slurry
based products the ability to monitor quality ON-LINE.
LiquidCheck
S4000 has high speed cameras and faster processing
boards and a special lighting setup so the instrument is
able to detect specks in slurry or gel products in an on-line
environment. Instruments have already been successfully
installed in a manufacturing plant to monitor a slurry product
that is moving at speeds greater than two and a half meters
per second.
FULLY
AUTOMATIC
The
LiquidCheck S4000
is a fully automatic instrument. Once started up to thirty
images can be processed per minute, which means
any change in the product specification can be detected
within a very short space of time. Traditionally, product
is monitored by taking samples
at set intervals, then processing them in a laboratory to
gain a filter grade or number. However with LiquidCheck
S4000 a correlation can be created in a very short space
of time to give operators in the control room the same information
with the results displayed constantly and updated every
few seconds.
A
live (left) and processed image showing what the LiquidCheck
S4000 detects. Some of the specks
in the live image have been circled in orange.
The
images above are taken from a LiquidCheck S4000. As you
can see from the live image, the specks can be difficult
to see with the naked eye. LiquidCheck S4000 has no problem
identifying the specks, as proven in the processed image.
LiquidCheck S4000 not only gives a filter or grade number,
but also gives the operator information about the number
of specks over a pre configured size found within the area
scanned as well as the percentage coverage of the dark specks
within the sample.
Next
|
